Akatec Micro Blaster is a dry cleaning pressure blasting machine for precise cleaning of difficult to access areas in metals, plastics, wooden items, plaster and more.
Used in conjunction with the extra fine classic powder (782-4261) the Akatec blaster is ideal for safe cleaning of:
Operated with foot-switch and nozzle (both included) for precise controlled spraying.
Product dimensions and technical detail in 'Specification' tab below.
Other cleaning powders available for the cleaning of books, paper, sandstone and granite, please contact us for more details.
There is no need for any other source of energy but pressurised air. Akatec Micro Blaster can either be connected to the pressurized air system of a spraying cabinet or can be connected to any other pressurized air pipe. It has to be ensured that only clean and dry air is filled into the Micro Blaster.
The small dimension and the low weight enables the easy transport and versatile use of the Micro Blaster. The spraying pressure of Akatec Micro Blaster is steered by an adjustable pressure regulator. Included is a pressure release valve which cuts off the air stream immediately after switching off the Micro Blaster. Unwanted spraying is avoided. The Akablast extra fine powder (782-4261) is the most suitable for the Micro Blaster.
You will require air pressure to operate the system. Should you not already have compressed air available we recommend a compressor with a minimum 110 litres per minute. We will be pleased to quote should you have any difficulty in obtaining a compressor.
Container content: 0.7Litres
L x W x H (mm): 240 x 200 x 340
Working pressure: Maximum 6 bar
Air consumption: 110 l/min with 1.8mm nozzle
Weight: 5.8kg (without pedal)
Precautionary measures: Protection glasses/mask
© 2017 Preservation Equipment Ltd
| Powered by Shopfront
Full Site |