PEL-Cloth

MicroFibre Cleaning without chemicals (just use water). Until recently it has not been possible to clean surfaces without the use of chemicals. Technology has changed this, with the PEL-Cloth you can clean either with or without water. Excellent results are achieved on all surfaces, without the need for cleaning agents and chemicals, and you protect yourself and the environment.

The secret is in the fibres

Pel Cloths are manufactured from tiny ultra micro fibres. These micro fibres have such a good, natural cleaning action compared to normal fibres – breaking down, trapping and absorbing dirt particles so well, that only water is necessary as a solvent. Our cloths are made from polyester/polyamide ultra micro fibres, which contain no chemicals and give such a good cleaning effect that only water is needed as a solvent. The fibre mix gives the cloth enormous absorption. When used damp, the cloths clean all surfaces, especially glass, plastics, stainless steel, chrome, brass and wood. When used dry the cloths have a natural “positive” charge which attracts “negative” dust. If correctly maintained, in normal use, our products will last for several years and pay for themselves many times over.

How to use your PEL-Cloth MicroFibre Cleaning System. It is important to follow these instructions.

Using the PEL Cloth…DRY
The static effect when using the cloth dry gives it an extremely good accumulation ability for dust and micro particles. Drag the cloth lightly over the surface to be cleaned and the particles will stick to the cloth. Do not rub hard on plexi glass. Dirt in the cloth could scratch the surface.
Using the PEL Cloth…DAMP
Wet thoroughly with pure water only, (no soap) completely wring out and fold, then wipe impurities from all dirty surfaces such as glass, mirrors, aluminium, stainless steel, plastics, treated and untreated wood, tiles, brass etc.
Using the PEL Cloth…WET
Wet thoroughly with pure water only, (no soap) completely wring out and fold, then use as you would a wet sponge.
Maintenance of the PEL Cloth
For the cloth to perform correctly, it is necessary to keep the cloth clean with regular washing. The cloth should be hot washed at 95°C. It can be machine washed at least 3000 times. For small quantities you may choose to boil the cloths in a saucepan for 15 minutes. Use 1/3 of the normal dose of ordinary washing powder. Always wash the cloths separately from other items to avoid adding fluff to the cloth.

N.B. Do not use fabric softener or bleach.The fabric softener removes the static effect for dry use and bleach breaks down the micro fibres. Either tumble dry or hang dry. If too much washing powder is used, the fibres become blocked and the performance of the cloth is reduced. Wash the cloth a few times without any washing powder to remove excess soap.