Crossweld Polyester Film Sealing Machine

NEW Improved design

Preservation Equipment Ltd’s polyester sealing machines are recognised and trusted worldwide. After years of experience with the previous Cross weld we have now introduced the ultimate sealing machine.This machine has been designed with health and safety approval for fast and consistent polyester welding and encapsulation.

Not using jaws means you are not restricted by the jaw width, and can continually weld very wide sheets. This style of operation allows much more room to work with the material you are sealing.

The Crossweld™ is designed especially to suit the welding of polyester film, which requires a flat support surface both sides of the weld. The sealing of polyester film requires machines that have been manufactured for the precise welding of the very narrow band melt point of polyester film, if it’s too high it will melt through the film, too low and it will not seal. The welding element must be fitted to the top moving jaw, not on the base/bottom as with bag sealers, this is essential for lining up the weld and sealing polyester to board.

The heat compensating device uses the latest electronics to ensure consistent welds every time.

The Crossweld can be used for sealing various thicknesses of polyester film and other materials to make pockets, sleeves and bags.

The working alignment grid squares can be replaced when worn. Replacement heating elements and PTFE material are easily installed. The PTFE cloth protecting the welding element is simply replaced by winding new material into place from the roll attached to the machine, a real advantage for quality welds.

  • Size: Length 910mm, width 400mm, depth 170mm
  • Complete with instructions, spare element and PTFE cloth
  • Each machine is shipped in a wooden crate arriving ready for use
  • Make enclosures, pockets, sleeves and bags with many materials, Polyester bonded to paper or board, Reemay, Hollytex, Tyvek, PEL Softwrap, Bubble film, Marvel Seal

Spares for the previous generation of this machine (pre-2020) 806-7000 are still available.

Read More
Crossweld Sealing Machine 240 volt (NEW model as pictured)
P806-8000 806-8000
Pack Size: Each Price: £3,295.00 ex VAT In Stock
PTFE Cloth 700mm x 600mm Spare for Crossweld
P806-7002 806-7002
Pack Size: Each Price: £39.00 ex VAT In Stock
Spare Heating Element Crossweld Sealing 806-7000 (pre-2020 model)
P806-7001 806-7001
Pack Size: Each Price: £10.00 ex VAT In Stock
Base protection PTFE tape 19mm x 15m for P806-7000 (pre-2020 model)
P806-7003 806-7003
Pack Size: Each Price: £49.00 ex VAT In Stock
Accessories to fit
12 Micron Polyester Roll 1524mm x 100M
P415-12 415-12
Pack Size: Each Price: £34.60 ex VAT In Stock
36 Micron Polyester Roll 1524mm x 50M
P415-36 415-36
Pack Size: Each Price: £49.70 ex VAT In Stock
50 Micron Polyester Roll 1067mm x 20M
P415-0050 415-0050
Pack Size: Each Price: £27.40 ex VAT In Stock
50 Micron Polyester Roll 1067mm x 100M
P415-503 415-503
Pack Size: Each Price: £91.60 ex VAT In Stock
75 Micron Polyester Sheets 220mm x 158mm A5
P415-575 415-575
Pack Size: Pkg 100 Price: £9.00 ex VAT In Stock
75 Micron Polyester Sheets 307mm x 220mm
P415-475 415-475
Pack Size: Pkg 100 Price: £15.15 ex VAT Low Stock
75 Micron Polyester Sheets 430mm x 307mm
P415-375 415-375
Pack Size: Pkg 100 Price: £29.60 ex VAT Low Stock
75 Micron Polyester Sheets 604mm x 430mm
P415-275 415-275
Pack Size: Pkg 100 Price: £58.25 ex VAT In Stock
75 Micron Polyester Sheets 851mm x 604mm
P415-175 415-175
Pack Size: Pkg 100 Price: £115.30 ex VAT In Stock
75 Micron Polyester Roll 500mm x 20M
P415-5020 415-5020
Pack Size: Each Price: £21.95 ex VAT In Stock
75 Micron Polyester Roll 1067mm x 20M
P415-75 415-75
Pack Size: Each Price: £34.50 ex VAT In Stock
75 Micron Polyester Roll 1067mm x 100M
P415-753 415-753
Pack Size: Each Price: £126.95 ex VAT In Stock
75 Micron Polyester Roll 1524mm x 50M
P415-755 415-755
Pack Size: Each Price: £95.85 ex VAT In Stock
100 Micron Polyester Roll 1067mm x 20M
P415-100 415-100
Pack Size: Each Price: £44.00 ex VAT In Stock
100 Micron Polyester Roll 1067mm x 50M
P415-1005 415-1005
Pack Size: Each Price: £93.25 ex VAT In Stock
125 Micron Polyester Roll 1067mm x 50M
P415-1250 415-1250
Pack Size: Each Price: £130.75 ex VAT In Stock

Warning The success of the Crossweld™ has attracted competitors to offer bag and flat tube machines with bottom element. We suggest these machines, designed for sealing low melt point polyethylene, are not suitable as a crossweld machine. To avoid disappointment, talk with customers who have purchased the Crossweld™, they will tell you how superior our machines are, that’s why we make this statement. The Crossweld™ is designed especially to suit the welding of polyester film, which requires a flat support surface both sides of the weld. The sealing of polyester film requires machines that have been manufactured for the precise welding of the very narrow band melt point of polyester film, if it’s too high it will melt through the film, too low and it will not seal. The welding element must be fitted to the top moving jaw, not on the base/bottom as with bag sealers, this is essential for lining up the weld and sealing polyester to board.

We use cookies for essential functions and optimisation of this website. Please see our Privacy Policy for more information. Click to ‘OK’, or continue browsing to accept all cookies.